Change Country Contact Us
Spectrum

Waste Heat Recovery Solutions: Putting Excess Heat to Work

Extract energy from waste streams for effective energy recovery using Aavid Thermacore heat exchanger solutions.

waste heat recovery thermal managementWaste heat recovery puts excess heat to work, providing warmth for buildings or steam or process heating for chemical processing. That conserves valuable energy by extracting thermal energy from a waste stream and putting it to work. Waste heat recovery has been proven through decades of application. Aavid Thermacore's passive two-phase heat pipe technology enables the process to enter the 21st century.

Heat pipe technology, with its low thermal gradient two-phase mode of heat transfer, enables more efficient energy recovery by minimizing the ΔT required between two process streams. That enables higher levels of energy recovery, or permits the use of a smaller, lower-cost heat exchanger solution. Waste heat recovery has been applied to a wide range of residential, commercial and industrial applications, and heat pipe heat exchanger solutions have been applied to improve performance in all these areas:

  • Make-up air heat exchangers (residential)
  • Dehumidification heat exchangers (commercial)
  • High-temperature waste gas heat exchangers (power and chemical process industries)

Aavid Thermacore can provide thermal solutions for waste heat recovery at any temperature.


 

Thermal management challenge? Take the first step towards the solution for you. Please contact an Aavid Thermacore technical representative or e-mail info.thermacore@aavid.com for more information on our thermal solution technologies.

 
Since 1970  •  AS 9100  •  ISO 9001 Certified  •  DDTC/ITAR Registered • AAVID Corporate
Footer Image
Copyright 2017 Thermacore, Inc. All Rights Reserved